Page Buttons

Thursday, September 12, 2013

Easy Peasy Chevron Quilt Tutorial

Okay peeps!  We all know that chevrons (or zig zags, if you prefer) are all the rage right now, so I thought I would take pictures of my process on this one and write up a little tutorial for how to create a quick and easy chevron quilt.  Y'all know I'm all about quick and easy!

Now, the first thing you need to know about chevron quilts is that there are lots of variations.  I'm going to show you how to create a chevron quilt where each stripe is a different fabric, without a solid between each one, like this-


The important thing to remember is that once you have the basic construction down, you will be able to modify the design to suit your needs.

So let's talk about one of the cornerstones of many beautiful quilt blocks- the Half Square Triangle, or HST for short.  Let me just tell you right now that if you're afraid of them or dislike them, we're going to conquer that with this quilt.  And afterward, you're going to wonder why you ever hated them at all!
If you can make HST's, you can make a chevron quilt if you just pay attention to a few details along the way.  

Start by choosing several fabrics to create your chevron stripes.  You can choose to have just a few that repeat, or eleven different fabrics as I have here.  You'll need fat quarters or quarter yard cuts (make sure you have a full 9 inches in width if you choose quarter yard cuts) for each chevron.  Arrange your fabrics in the order that you want your chevrons to be on your quilt.  I've separated like colors so that they aren't touching each other, but go with whatever is pleasing to you.  Take a picture of your fabrics, all laid out in order.  I promise, it could be a lifesaver later on!  From here on out, keep the fabrics in this order for every step.


Okay, let's talk HST's.  We're going to make them four at a time.  Now if you know anything at all about making HST's, you know that some don't prefer this method for a couple of reasons-

1.  This method leaves bias edges, so the blocks are prone to stretching-  True, but I'll explain later how I deal with this, and they're no problem.

2.  This method produces HST's that aren't exactly whole or half inch sizes.  Again, this is true, but here's the thing, as long as they're all the same size (which they will be) this isn't a problem.  Since our entire quilt will be made from HST's, they'll fit together with each other, and we won't even have to do any trimming!

Alyce at Blossom Heart Quilts made this nifty chart that gives the starting square and finished HST sizes and I'm including it here with her permission.  Thanks for all the math, Alyce!


Now that we have that out of the way, let's get down to business, shall we?  From your first and last fabrics, cut two nine inch squares, and cut four 9 inch squares from each of the rest.  Remember to keep them in order when you stack them up!


Take your lovely stack of squares and pair up the two squares from the first fabric, with two squares of the second fabric.  Then take the remaining two squares from the second fabric and pair them with two squares from the third fabric.  Continue pairing your squares like this until you've reached the end of your fabrics.


Time to make your HST's!  Take your pair of fabrics and put them right sides together.  Sew a 1/4 inch seam all the way around your squares.  Yes, sew it closed.  I promise it will make sense in a second.  Repeat this for every pair of squares.


Take your sewn squares to your cutting mat, make sure they're straight, and cut corner to corner, in both directions.  Cut all of your sewn pairs in this way.  You can leave them closed for now.  There's no sense in manipulating the fabric any more than you have to.


Once you've got your beautiful stack of HST's, it's time to press them.  So, lower your ironing board if you can (so you can sit), put in a good movie, grab a nice beverage (that you keep away from the ironing board, of course), and get as comfy as you can.  It doesn't take hours, but you might as well enjoy yourself!


By the way- do you know the difference between ironing and pressing?  Believe me- to a quilter, there is a HUGE difference.  Pressing involves putting the iron down on the fabric and allowing the weight of it to do the work.  Pressing always means picking the iron up to move it.  When pressing, you never move the iron back and forth, or pull the fabric with the iron.  Be sure to always press your fabric, instead of ironing it.

Open each HST, spray liberally with starch, and press with a very hot iron.  I use my iron on the hottest setting.  The starch will add stability to the bias edges, but keep in mind that if you rub your iron on the fabric, they will get distorted even more easily when wet.

Take your scissors and trim the little dog ears from each side... and that's all the trimming we're going to do!


See?  A beautiful little stack of HST's without too much fuss!  Once you have this, you'll have a finished quilt top in no time.


Of course your HST's are still in order, so laying out your blocks will be a snap!  Just lay them with the diagonal seams going in alternating directions to create the chevron pattern.  Notice that you have 16 HST's with each fabric- 8 with the fabric above it in the quilt, and 8 with the fabric below it.  So, lay out your blocks in rows of 8.



Once you have it all laid out, pick up your rows from left to right.  Sew the blocks into rows, and sew the rows together.  Your finished quilt top should measure about 46x58.  Easy peasy, right?


As I said before, once you understand how it goes together, it's easy to make changes to this basic design.  Here are just a few easy ways to do this-

1.  If you want to make the quilt bigger, you can start your HST's with bigger starting squares, or you can make your quilt have more than 8 blocks across.  To keep it easy with the "four at a time" HST method, you could increase the width to 12 blocks across.

2.  You can use a solid color for every other chevron, and use several fabrics in the others, giving it a scrappy look.  If you choose to do this, then you wouldn't need to worry about pairing the fabrics, since every print would be paired with a consistent solid, making it really easy!

3.  You could use just a few fabrics and repeat them in order.

The bottom line is- chevron quilts aren't nearly as tough as they seem!  Once you master the HST, not only will chevron quilts be a breeze, but the door to tons of other patterns will be opened to you as well!  I hope you give it a try!

Edited 9/14- Here is a picture of the finished quilt.  Check out the full post with other photos HERE!



85 comments:

  1. Great tutorial, Kelly! Love that fabric palette you used!

    ReplyDelete
  2. Awesome Kelly! I love to look at the chevrons, but haven't wanted to make one yet. If I change my mind, I'll do it your way for sure!

    ReplyDelete
  3. Your chevron quilt is soo adorable. Love your choice of fabrics. You get so much done!

    ReplyDelete
  4. I have never even heard of making HSTs that way, looks so easy! Great tutorial, I'm going to have to try it out. Thanks!

    ReplyDelete
  5. Thank you for the great tutorial. I am heading up for shopping with my daughter on Saturday and one of the nearest, biggest quilt shops just announced it is going out of business and having a sale--I just might have to splurge on 11 fat quarters to make one!

    ReplyDelete
  6. Thanks for the tutorial ... I'll give it a go :)

    ReplyDelete
  7. Thanks for sharing this HST tutorial and the matching maths! You fabric choice is superb!

    ReplyDelete
  8. Great tutorial Kelly. Thank you for sharing this method. I am tempted to give it a go. Marie (mlismore@optusnet.com.au)

    ReplyDelete
  9. Chevron quilts are so fun to make! I've made one too http://akainik.wordpress.com/2013/07/28/quilt-terminada-finished-quilt/
    :)

    ReplyDelete
  10. I've never made HSTs using that technique... this is going on my Make Soon (2014) list! Love it.

    ReplyDelete
  11. Thank you! My niece is having a baby this fall and loves chevrons. I really like your organization ideas - I know my colors would be messed up without them. Thanks for the great tutorial.

    ReplyDelete
  12. This tut is a keeper! Thanks so much for the "Easy peasy" instructions Kelly. I love your blog.

    ReplyDelete
  13. That does seem easy peasy! Thanks for the tute!

    ReplyDelete
  14. I love this one! Chevrons make me smile and your work with them is the icing on the cake! This is definitely going on my to-do list. I love your blog - it is my top favorite!

    ReplyDelete
  15. It looks so easy now. I put it on my to do list too! Thanks for sharing!

    ReplyDelete
  16. Great tutorial and I love the fabrics you chose for yours. I love doing HST anyway, so this will be on my to do list very soon. Thanks much for all the great pictures at each step of the way.

    ReplyDelete
  17. Very good instructions Kelly. Love the fabrics you chose for this. Nicely done. always enjoy your blog.

    ReplyDelete
  18. Thanks Kelly! This one is getting a pin in it!

    ReplyDelete
  19. What a cute chevron quilt and awesome tutorial!

    ReplyDelete
  20. Beautiful quilt. I love the colors you chose. I still haven't made a chevron quilt even with how easy peasy it is, just like your great tutorial showed.

    ReplyDelete
  21. Beautiful quilt. Great instructions. Been wanting to make a chevron quilt for a long time. Just got too many projects started.
    Donna from
    http://blackberrywintercrafts.blogspot.com

    ReplyDelete
  22. I have had a bit of a quilting block this past week but after seeing this post, that is long gone. I definitely have my next project! Thanks so much for sharing, it's beautiful, and I am inspired. Can't wait to get started.

    ReplyDelete
  23. Thank you! With these wonderful instructions I should be able to do this!!

    ReplyDelete
  24. Thank you so much for this clear tutorial! Just what I needed! I have had my group of fabrics set aside for quite a while, and knew I wanted to do a chevron quilt, but didn't really understand how to order the cutting and so on! NOW it is easy!

    ReplyDelete
  25. Photo Quilt Squares
    This is an excellent posting. You have my vote and I will bookmark this website right now.

    ReplyDelete
  26. I've been looking for beginner baby quilt patterns and this looks great! I love the blog.

    ReplyDelete
  27. Great tutorial! Can you share how much fabric you used for border, backing, and binding? Thanks!

    ReplyDelete
    Replies
    1. The border is 4 inches finished, so I just cut 4 or five strips at 4.5 inches, the full width of the fabric. For binding, I cut 2.5 inch strips, width of fabric, and used 6 strips, I think. So about half a yard in binding fabric, 1 yard of border fabric. For the backing I used a lot of scraps, so it changed my yardage, but for a full backing, you could probably use about 3.5 yards. Hope this helps!

      :) Kelly

      Delete
  28. Hmmm... you mentioned the difference between Ironing and Pressing (which I didn't realize there was much of a difference), but I can't figure out, except maybe the later statement is the pressing and the first part is the "Ironing".

    [[Pressing involves putting the iron down on the fabric and allowing the weight of it to do the work. Pressing always means picking the iron up to move it. When pressing, you never move the iron back and forth, or pull the fabric with the iron. Be sure to always press your fabric, instead of ironing it.]]

    ReplyDelete
  29. Wonderful! Thank you very much. I was just trying to figure out how to eliminate the solid fabric in between the chevrons. This will do it!

    ReplyDelete
  30. Wow! I absolutely adore chevrons and I love how you made this look so easy. I don't make quilts (although your post may have convinced me to do so), but I will definitely will be using this to make a smaller version to make bags. Thanks!!!!

    ReplyDelete
  31. This blog post just changed my life. CHANGED. MY. LIFE.

    ReplyDelete
  32. Quick Questions: How big is the quilt when done? Do ya think it would look good without the border?

    ReplyDelete
    Replies
    1. I made it and it WAS Easy Peasy!!! THANKS Kelly! I welcome any and all to stop by and check it out here: http://myplvl.blogspot.com/2014/03/alyof-f-march-chevron-quilt-finish.html
      So glad we have this tutorial linked under our Chevron Quilt theme!!

      Delete
  33. This method of making HSTs beats any other method i have seen Hands Down !~! It's painless, quick and easy as pizza with Boboli crust and sauce already in the freezer. Thanks so much for sharing this tute. It changed my life with HSTs and I bet it will for others too. It's so much quicker and cleaner and sharper !~!

    ReplyDelete
  34. Love this technique! Would you say that using fabrics with larger patterns or motifs might not look as good as small all-over prints?

    ReplyDelete
    Replies
    1. Thank you so much! Actually, I think that this works for large or small scale prints!

      :) Kelly

      Delete
  35. I'm going to try this. I hope it works! LOL It's me if it doesn't. LOL Kelley

    ReplyDelete
  36. i have never quilted before but would love to make this pattern to place over a backing that is 40"x60" how do i work out how big to cut my squares? thankyou. im not adding a border so i would like the finished piece with all the chevrons to be 40x60. In the tutorial you said yours was 46x58. i can always make the backing smaller if i need to for the perfect maths but unable to go bigger as the exact measurement of the backing is 40.5"x61" thankyou

    ReplyDelete
    Replies
    1. Stephanie, the quilt will be 8 blocks across, so you will want them to finish at 5 inches, for a total of 40 inches in width. If you start out with 8 inch squares, that should give you a quilt top that will fit your backing. The quilt has 10 rows of blocks, which would only give you 50 inches in length, so to make a quilt 60 inches long, you would need to have 12 rows with 13 fabrics. I hope this helps! Good luck!

      :) Kelly

      Delete
    2. so I want to make a chevron BABY quilt but only chevron on the top and on the bottom with a white big middle (to applique the baby's name once I figure that out!) I wanted to just used the width of the white fabric to make it easy on myself so I don't have to sew anything else to the white part. How BIG and how many HST's would I need to go across the 45 inch white fabric?? Thanks so much

      Delete
  37. thankyou so much that is very helpful. im looking forward to attempting it

    ReplyDelete
  38. Simply brilliant! I just ran across this while looking up chevron quilts. I'm definitely going to be trying this method out in the future. I HATE HST but this makes my dislike lesson somewhat! Great looking quilt and thanks for the tut!

    ReplyDelete
    Replies
    1. Thank you Amber. Good luck with it! I promise, this method is really straightforward!

      :) Kelly

      Delete
  39. Hi, I wanted to try your method of making a quilt but the fabric I like doesn't come in fat quarters. How much of each fabric will I need to purchase if I use 11 different fabrics? Trying to figure out how I will ask for this at the fabric store cut counter once I pick out my fabrics. Thanks.

    ReplyDelete
    Replies
    1. You will need to be able to cut 9 inch squares, so quarter yard cuts will work just fine! Since a quarter yard is exactly 9 inches, be sure you get the full quarter yard!

      :) Kelly

      Delete
  40. i made a gorgeous quilt for my granddaughter using this pattern in a rainbow of hand dyed fabrics (my own!). i machine embroidered her name in hebrew with flowers and musical notes because her name means song in hebrew. i can't seem to upload the pic, but it was lovely.

    ReplyDelete
  41. Hello! My grandma has graciously offered to make this quilt for me for a queen size bed- how many squares should she use? We will not be using a border. Hope you can help!

    ReplyDelete
    Replies
    1. Haylee, a generous queen size is roughly 80x100". So I would make the quilt 14 blocks across (width) and 17 blocks in length. Hope this helps!

      :) Kelly

      Delete
    2. Hi Kelly, I'm interested in making a queen also, I would like to start with 10 1/2 inch squares which makes about 7 inch HST's, correct? So if it is 80 wide I would need 12.3 HST's taking into account 1/4 inch seem allowance and 100 wide I would need 15.38. Is it best to round down and add a border or round up and make another square = 13 wide by 16 high ? Would you please confirm if I'm doing the calculations correctly, I'm still new to quilting and making my own pattern. Thanks, Terri

      Delete
  42. Love your chevron quilt! The colors are so much fun!

    ReplyDelete
  43. I would love to make this quilt as a twin size for my friend's new baby. I have 10 fabrics picked out. I'm trying to figure out the size of the squares I would need to cut to start with. I would like to do a border. I'm having trouble figuring out the conversion from a final size, and I'm having trouble finding what size a standard twin quilt should be!

    At the moment I'm thinking if I start with a 10.4" square, it will give me 6.5" finished squares which will give me 52" wide by 65" long. Adding a 4" border will give me a finished quilt of 60" wide by 73" long. Is this right? Or am I better off with a different size starting square?

    ReplyDelete
  44. It sounds to me like you've figured it our properly. Here is a link to many helpful charts, including a great one with quilt sizes!

    http://www.sassyquilter.com/helpful-charts/

    :) Kelly

    ReplyDelete
  45. This comment has been removed by the author.

    ReplyDelete
  46. I'm writing a blog post for my guild and have included a link to this tutorial. I would like to use the first picture in this post of yours as a thumbnail next to the link. If this is NOT okay with you please notify me and I can change to the EQ drawing I made, however your picture is much prettier. Thanks.

    ReplyDelete
  47. Love the tut. Super easy. Just now making mine.

    ReplyDelete
  48. so if I wanted to make it 12 blocks across how many squares of each color would I have to cut? Math and I don't work well together, especially this late at night. LOL. Thanks

    ReplyDelete
  49. This comment has been removed by the author.

    ReplyDelete
  50. Thank you very much for the tutorial. I used it to make my daughters quilt.

    ReplyDelete
  51. Thank you so much from a beginner quilter!! This made it so easy to understand. You girls are great for sharing your knowledge and experience!!!

    ReplyDelete
  52. Just love this quilt. Great instructions and so easy. Have you ever tried the strip method with piecing rectangles together to form the zig zag? Which do you like better? I'm making a halloween quilt using this tutorial. Hope to post it in a Thursday link party soon.

    ReplyDelete
  53. Why oh why could I not have found this tutorial BEFORE I started my chevron quilt. I have already cut all my wee triangles so I guess I'll just have to make another chevron quilt to try this out! :P Thanks very much!

    ReplyDelete
  54. Glad I have found this ... made a practice doll quilt before making my daughter a black and white chevron quilt ... just need to go to fabric shop now. This method of chevrons will save time! Thank you. :)

    ReplyDelete
  55. I love your pattern! I'm currently using it to make a satin quilt. This is my first time working with satin, but so far the quilt is coming together beautifully. Thanks for sharing this easy pattern!

    ReplyDelete
  56. Hi I love the turorial. Could you please tell me how much fabric do I need, to do only two clours single bed quilt. It will be much appreciated.

    ReplyDelete
    Replies
    1. This quilt measures 46x58 as I have made it. You would want to add one more set of four HST to each row to give you enough width for a twin bed, and you'd need to add 6 more rows to give enough length (so 16 rows). So, instead of four squares of each print, you would need 6 squares for each print row. With 8 rows of one fabric, and 8 rows of another fabric, you would need (48) 9" squares squares of each fabric. By my math, that is 3 yards of each print you want to use.

      :) Kelly

      Delete
  57. Eine super Anleitung, vielen Dank
    liebe grüsse aus der schweiz

    ReplyDelete
  58. Thank you for this great tutorial! I used it to make my first quilt ever for a friend's baby and it turned out great! :)

    ReplyDelete
  59. This pattern was great for a beginner. I made a crib size quilt and it is adorable. I would like to make one for a queen size bed. Can someone help me with the math. I am going to cut 10 1/2 inch squares to start with which makes about 6 1/2 inch HST. There is a post above from May, 2014 that reads: "a generous queen size is roughly 80x100". So I would make the quilt 14 blocks across (width) and 17 blocks in length" what size blocks does this one start and HST size before piecing it all together? Thanks for your help!

    ReplyDelete
    Replies
    1. I'm so glad you like it, Terri! I would do 13 blocks across (84.5" wide), by 16 blocks long (104" long). The HST will finish at 6.5." In this quilt, I started with 9 inch squares, which yields 5.5" finished HST. Good luck with it!

      :) Kelly

      Delete
  60. I am so excited to start cutting my fabric! I pondered for such a long time before finding your tutorial; I knew I wanted to make a chevron quilt but couldn't find a method that fit my learning style. Your tutorial is GENIUS! I have been an Algebra geek all my life and when I saw the conversion chart with the equation I knew I had found my "pattern/method" for my granddaughter's quilt. Tonight I decided on my fabrics, have them laid out in order and will have everything cut out in no time. The hard part is done! Some people will laugh at my logic, but I trust anyone who uses algebra!!! Thank you so much for your work on this project and being willing to share it freely with the rest of us! Deb

    ReplyDelete
  61. Kellys, thanks for the great tutorial, now I can't wait to make a baby quilt for my daughter in law. Can you please help me with the math, what size should I cut my squares for the correct dimensions of a baby quilt?

    ReplyDelete
    Replies
    1. you're welcome! This quilt is 46" x 58" which I consider a generous baby quilt size. I cut my squares at 9 inches.

      :) Kelly

      Delete
  62. If I use a one way pattern fabric, will I have a problem?

    ReplyDelete
    Replies
    1. Since you are cutting the HST across the bias, your print will be diagonal, so you may want to choose a pattern that is non-directional.

      :) Kelly

      Delete
  63. How many fat quarters of each pattern do you need for a baby quilt?

    ReplyDelete
  64. I had accumulated so much fabric from making masks, that I wanted to try making a quilt. I was looking for an easy beginner quilt and this was it! Thanks for such clear and concise instructions. I love the way my quilt came out. It was not perfect, but I am still learning as I go along. Working on a second quilt now.

    ReplyDelete
  65. I made one. Always looking for something new to do with fabric. Thanks for sharing.

    ReplyDelete

Thanks so much for your comment and for visiting! I read and appreciate every single comment, and I reply to each one as soon as I can. If you don't hear back from me, you might be a no-reply blogger. :)

09 10 11 12
Blogging tips